Subject: Flexible, fast, and non-contact measurement of cylindrical lenses

July 5, 2024

Quality control of single cylindrical lenses

New CylinderCheck module


TRIOPTICS is launching a solution for the quality control of single cylindrical lenses for the OptiCentric® 101 centration measurement system.

Numerous applications of optical systems are only possible through the use of cylindrical lenses. These include laser scanning, illumination systems for stepper optics, LiDAR and cine applications as well as light sheet microscopy.


With the CylinderCheck module, consisting of hardware and software, TRIOPTICS is launching a solution for the quality control of single cylindrical lenses for the OptiCentric® 101 centration measurement system. It is flexible and versatile in its use and allows the measurement of


  1. the centration and parallelism of the cylinder axis and the mechanical datum,

  2. the clocking error of the cylinder axis to a mechanical datum or with respect to the cylinder axis on the second side of the element and

  3. the wedge angle between the cylinder axis and the element’s second cylindrical or flat surface.

The associated software guides the operator through the individual steps of the measurement. This makes the measurement quick and reliable.


In addition, the CylinderCheck software on an OptiCentric® 101 with rotary air bearing is used to check cylindrical lenses in a lens system. Thus, the centering of the cylindrical axes in x- and y-direction are examined. In one measuring process, the system determines the positions of the centers of curvature of all lens surfaces in the objective lens in the two axial directions of the cylindrical lens. The MultiLens® software algorithm uses this information to determine the position of the optical axis of each element, including the cylindrical lens. The resulting optical axis of the entire system is also calculated.

Request a demo

OptiCentric®

High precision centration test device

––––––

The OptiCentric® product group represents the global standard for optical centration testing and manual and automated cementing and bonding of lenses and lens assemblies. It makes no difference whether the sample has a small or very large diameter, works in the visual or infrared spectral range, or is to be cemented, bonded or just measured: modular OptiCentric® systems permit a wide range of different applications and samples for optimum composition.

More information
Any questions? Contact me.

Our sales engineer

Nicole Hesse

––––––

Nicole Hesse is responsible for TRIOPTICS' OptiCentric® and ATS as Team Leader Sales. With her background as an industrial engineer (M.Sc.) she is responsible for the global market and supports our local partners. She pays special attention to finding the optimal solution for her customers.

E-Mail
LinkedIn
Xing
YouTube

TRIOPTICS GmbH | Strandbaddamm 6 | 22880 Wedel |  Germany

Tel.: +49 4103 18006-0 | Fax: +49 4103 18006-20 | www.trioptics.com 

Managing Directors: Kristin Holzhey, Dr. Stefan Krey, Simon Zilian

Registry Court: Pinneberg: HRB 3215 | USt-IdNr.: DE134800372


A member of the JENOPTIK Group

    This is an online snapshot of a newsletter created by the owner of trioptics_international (TRIOPTICS GmbH, Hafenstraße 35-39, 22880 Wedel, Germany) and sent via GetResponse on 2024-07-05. Report abuse