|
|
|
| FirstSpear STT.1 Plate Carrier
Combine the technological advances of FirstSpear and the marketing gonads of SKD in a dirty, backseat tryst, and the only thing that could gestate is a ground-breakingly evil product like the FirstSpear STT (Six-Twelve-Tubes) Plate Carrier.
Add to that the ultra high performance-to-cost-ratio of the SKD Armor Level IV Plates and a re-design of the STT to fit these plates like a custom Italian suit, and voila... TACTICAL ORGASM, otherwise known as the FirstSpear STT.1.
The FirstSpear STT.1 PC features the following: - First and only sub $200 Plate Carrier featuring BOTH 6/12™ and Tubes™ technology.
- ONLY FITS SKD Armor 10x12 Plates, but fits them PERFECTLY.
- All-Molle compatible front, back and cummerbund.
- Weights 1.5 lbs.
- Bottom flap pushes the plate to the top of the pocket for proper placement over your upper thoracic region.
- Exclusive SKD-spec loop fastener strips to add PIG AFC Pontoons for increased air flow and padded goodness.
- 3 different cummerbund sizes to maximize fit.
- Available in Ranger Green, Black, Coyote, Multicam, and MultiCam Black.
- Made in USA.
- SKD Exclusive!
We’ve also packaged the STT.1 with 2 SKD Armor 10x12 Level IV plates for an incredible deal at $499! Click HERE for the complete package!
|
| | | | | Arisaka Defense Inline Scout Mount- M-Lok
BACK IN STOCK - The Patent Pending Arisaka Inline Scout® Mount is designed specifically for the Surefire Scout Light® M600 and M300 series weapon lights. It replaces the stock Picatinny rail adapter with a low profile mount available for KeyMod and M-Lok handguards. The mount is especially useful on handguards that feature 45 degree angle mounting flats, such as the Bravo Company KMR, Knight's Armament URX 4, and Geissele Automatics SMR Mk8.
When used on a 45 degree angle mounting flat, the Inline Scout® Mount allows the user to position the light closer or farther away from the top 12 o'clock rail to give clearance for front sights or other accessories. Three positions are provided, allowing an offset of 0.12" to either side of center. The base of the Surefire Scout Light® sits 0.2" above the KeyMod or M-Lok mounting surface.
Additionally, the mount can be used in a cantilever fashion, with the end of it protruding past the front of the handguard. This can be useful with short handguards to help reduce barrel or suppressor shadows.
|
| | Arisaka Defense - Offset Scout Mount M-Lok
BACK IN STOCK - The Patent Pending Arisaka Offset Scout® Mount is designed specifically for the Surefire Scout Light® M600 and M300 series weapon lights. It replaces the stock Picatinny rail adapter with a low profile mount for M-Lok handguards. The Offset Scout® Mount is very low profile at less than 0.165" thick, also functions perfectly with the Arisaka 300 and 600 Series Light Bodies.
When used on the side mounting surfaces of M-Lok handguards, the Offset Scout® Mount places the light at a 45 degree angle and tucks it in closer to the rail system. Oriented upwards, the light is located at approximately the 1:30 or 10:30 clock positions. Oriented downwards, the light is located at approximately the 4:30 or 6:30 clock positions.
The Offset Scout® Mount also provides four lateral mounting positions for the light body, which allows the user to position the light closer or farther away from the top rail, front sights, or other accessories. Four positions are provided, spanning approximately 0.320". When used with the Arisaka 300 Series Light Body or 600 Series Light Body, even more clearance can be gained for larger front sights.
As shown in the pictures, the Offset Scout® Mount is compatible with most M-Lok handguards like the Geissele SMR MK4 and MK8, Mega MML and Wedge Lock, Midwest Industries SSM, Aero Precision Enhanced, EraThr3, Stubborn Mule SMLock, and SLR Rifleworks M-Lok models.
Length: 1.265"
Weight: 0.4 oz
The mount is CNC machined from 6061 aluminum and MIL-A-8625 Type III hard coat anodized. Includes necessary screws to attach light body to mount.
|
| |
|
|
| |
|
