Subject: Interface RFid RC522 Reader using Maker Pi Pico and CircuitPython
Hi Friend,
RFID or Radio Frequency Identification system consists of two main components, a transponder/tag attached to an object to be identified, and a Transceiver also known as interrogator/Reader. One of the example of this system is RFID based walk-through automatic checkout solution where you can fill up your cart and walk right out the door. 

This week we will share how to interface RC522 RFid readers using Maker Pi Pico and CircuitPython

 Learn how to do this project here and watch the video here.

New Arrivals
Snapmaker 2.0 Extruder Hot End Kit
See details »

micro:bit GPIO Expasion Board Bundles

We have created a Telegram channel "Trust Me, I'm A Maker" to share with you on Digital Making. Join now to receive the sharing instantly in your telegram.
See you again next week!

-- C.Y.Phang, Cytron Technologies  
Cytron Technologies Sdn Bhd, 1 Lorong Industri Impian 1, Bukit Mertajam, Penang 14000, Malaysia
You may unsubscribe or change your contact details at any time.

    This is an online snapshot of a newsletter created by the owner of Learn at Cytron (Cytron Technologies Sdn Bhd, 1 Lorong Industri Impian 1, 14000 Bukit Mertajam, Malaysia) and sent via GetResponse on 2022-01-19. Report abuse