Design a 3D model from scratch using TinkerCAD and print it! Sounds cool 😁If you're a newbie who are interested in 3D printing, yes this is it!
TinkerCAD is a free, online 3D modeling program that runs in a web browser, known for its simplicity and ease of use, suitable for newbie. We'll share on how to design a 3D model from scratch using TinkerCAD, slice using Ultimaker Cura and print it using Biqu B1 3D printer.
Click here for more details on the project and here to watch related video.
|
|
|
|
Introducing the next generation of Power over Ethernet (PoE) HAT from Raspberry Pi. - It delivers more power (deliver up to 25W)
- Implementing the 802.3at PoE+ standard.
- Runs cooler.
|
|
|
|
|
Bluetooth Serial Transceiver HC-05 (ZG)- Bases at CSR BC04 Bluetooth technology.
- With build-in 2.4GHz PCB antenna
- It’s at the Bluetooth class 2 power level.
- Range test: 10 meters
- Operating voltage: 3.3V to 6V DC
See details » |
|
Arduino MKR WiFi 1000-Presoldered Headers- Microcontroller: SAMD21 Cortex-M0+ 32bit low power ARM MCU
- Board Power Supply (USB/VIN): 5V
- Supported Battery(*): Li-Po single cell
- Circuit Operating Voltage/td>: 3.3V
See details » |
|
DAQ CPlate HAT- Dedicated onboard processor - PIC16F1517
- Provides real-time data collection
- Allows for future code updates
- Only needs two dedicated RPI pins (GPIO 25 and CE1)
- All features accessible via a rich Python command set
See details » |
|
CLiPtec 720P HD Wide-Angle USB Webcam with Mic- High Definition resolution 720P streaming video, transmitting and recording vibrant real video.
See details » |
|
|
| Like & Follow us on Facebook to get more update!
See you again next week!
|
|
Regards, HY, Cytron Technologies
|
|
